Coffee Shop Equipment List: What You Need, New or Used

A coffee shop equipment list with maker specs for espresso machines, grinders and brewers, utilities to plan first and what to check on used pieces.

By Food Service SurplusPublished 11 min read
Buyer guideEquipment

A coffee shop equipment list comes down to an espresso machine, grinders, a batch brewer with airpots or thermal servers, water filtration, refrigeration, ice, sinks and smallwares. Plan the power, water and drain lines before you choose models, because the spec sheets below show two machines both called "2-group" needing different circuits and different drains.

The used-or-new column is our judgment, not a manufacturer recommendation or a safety rating.

Item What it does Specs to check Used or new (our judgment)
Espresso machine Brews espresso, steams milk Voltage, circuit, receptacle, water line, drain, counter hole, footprint Reasonable used with service records and a demonstration under power
Espresso and bulk grinders Grind to order and for batch brews Voltage, height under shelves, burr condition Reasonable used; expect to check or replace burrs
Batch brewer Brews into airpots or servers Voltage, cord or hard wiring, water fitting, pressure, flow, height Reasonable used if the tank and sprayhead are clean of scale
Airpots and thermal servers Hold brewed coffee Capacity, fit under the brewer's funnel Reasonable used if seals and pump work and there is no odor
Water filtration Conditions water for machines Your water test, hardness target, space for the cartridge Used housing can be fine; buy cartridges new
Undercounter refrigeration Holds milk and prep items Footprint, voltage, ventilation clearance, holding temperature Reasonable used if it holds temperature on your thermometer
Ice machine and bin Makes and stores ice for drinks Water line, drain, voltage, cleaning record Reasonable used, but clean and sanitize it before first use
Three-compartment and handwashing sinks Warewashing and handwashing Bowl size, drains, faucet, local code Reasonable used if welds, faucets and drains are sound
Smallwares Pitchers, tampers, knock boxes, scales, cups Size, condition Mostly reasonable used; buy new anything hard to clean

This guide covers the coffee line. For cooking, prep and storage, use the commercial kitchen equipment checklist. Buyers can browse used beverage equipment and the wider restaurant equipment category.

What utilities should you plan first?

Start with the espresso machine. All four spec sets below are for 2-group machines, and they don't match:

Machine Power Circuit and receptacle Water Drain W x D x H (in)
Nuova Simonelli Appia Life 2-group full size (installer sheet) 220 V, actual 3350 W, 16 A 20 A, NEMA 6-20 1/2" dedicated cold line, shut-off, 3/8" compression fitting Open gravity, 1" minimum, within 3 ft 31 x 21.5 x 20
Rancilio Classe 5 USB 2-group Compact 208-240 V single phase, 3000 W 20 A, NEMA 6-20R suggested Dedicated cold line, female 3/8" NPT, shut-off within 4 ft, 30-70 psi Open gravity, 2" ID minimum, within 4 ft 24 x 22 x 21
Rancilio Classe 5 USB 2-group 208-240 V single phase, 4300 W 30 A, NEMA 6-30R suggested Same as Compact Same as Compact 31 x 22 x 21
La Marzocco Linea Classic S 2-group 208-240 V single phase, 4600 W, 22 A full load NEMA 6-30P and 6-30R suggested 3/8" male compression, 2 GPM, 45 psi dynamic 3/4" flexible line to a floor drain, 1/4" per foot minimum slope 28 x 23 x 20.5

The Appia row comes from a June 2020 pre-installation sheet by the installer Zuccarini. Nuova Simonelli's own page lists the 2-group Appia Life XT at 3350 W with an 11 L boiler and 784 x 545 x 498 mm, and a 554 mm wide compact 2-group at 2900 W with a 7.5 L boiler. That page doesn't list voltage, plumbing or drain requirements, so get those for your exact unit.

Group count doesn't tell you the circuit, so read the data plate. Rancilio's 2-group Compact can even be special-ordered at 110 V with a 2700 W heat element. Our NEMA plug chart explains the receptacle codes.

Space under the counter matters too:

  • La Marzocco's guide shows a 2.5" counter hole and an external pump box of about 12 x 12 x 12 inches.
  • Zuccarini asks for a hole of at least 2.5", drilled before the technician arrives on stone or metal counters, and room for a softener up to 30 x 8 x 8 inches.
  • Rancilio asks for 6" of clearance on all sides, 24 x 5 inches for an in-line filter and 3" clear below the filter for changes.

The sheets cited here list electrical and water services only. If you add a kitchen, check gas and hood needs separately.

What do grinders need?

La Marzocco's U.S. guide shows a separate 110 V, 15 A supply to the grinder, and Zuccarini wants the machine's receptacle within 2 ft of the grinders. Height is the easy thing to miss. Mahlkönig's EK43 sheet lists 23 x 82.8 x 41 cm, so about 32.6 inches tall, with 26 kg net weight, 98 mm cast steel burrs and 1300 W maximum power. Measure the gap under your shelves.

The same sheet lists 100-120 V and 200-240 V versions, so confirm which one a used grinder is. FDA's model Food Code names coffee bean grinders among equipment to clean at the manufacturer's frequency or, without one, often enough to prevent soil or mold (¶ 4-602.11(E)(4)).

Which brewer specs matter?

Brewers run from an ordinary plug to about 25 A at 240 V, and water fittings differ too.

Brewer Electrical Water H x W x D (in)
BUNN CWTF15-APS airpot brewer (23001.0017) 120 V, 11.4 A, 1370 W, NEMA 5-15P 20-90 psi, 1/4" male flare 24.1 x 9.0 x 21.5
Fetco CBS-2241 NG single, 1 gal 120 or 120/240 V, 12.8-19.7 A, cord and plug 20-75 psig, 3/8" male flare, 1.5 gpm minimum 34.5 x 11.75 x 20.5
BUNN ICB Twin 120/240V SST Tall (53200.0101) 120/240 V, 25 A, 6000 W, 3 wires plus ground 20-90 psi, 3/8" male flare, 1.00 GPM 35.0 x 20.2 x 22.3
Fetco CBS-2252 NG twin, 1.5 gal 200-240 V, 21.3-25.5 A, terminal block 20-75 psig, 3/8" male flare, 1.5 gpm minimum 36.88 x 21.88 x 22.5

Don't read "120/240" as "runs on 120." BUNN's sheet says the higher number is the supply voltage, and the 120 V rating only feeds certain internal components.

Choose the server format before the brewer, in our judgment, since the two have to fit each other. BUNN says the CWTF15-APS accommodates 1.9 to 3 L airpots, and the ICB Twin brews into 1 to 1.5 gallon servers. BUNN lists servers as sold separately for both, so a used brewer may arrive without them. For serving sizes, see our paper coffee cup size guide.

What do makers say about water?

Water targets don't transfer between brands. Rancilio wants 2-3 grains of hardness per gallon, and says potable water isn't automatically suitable for its machines. Zuccarini's Appia sheet makes softening mandatory above 3 GPG (51 ppm). La Marzocco's filtration target for the Linea Classic S is 70-100 ppm total hardness, with 90-150 ppm TDS and pH 6.5-8, and its guide marks the required filter as not provided.

At Rancilio's conversion of 17.1 ppm per grain, La Marzocco's range is about 4.1 to 5.8 grains, above Rancilio's limit. A softener set up for one machine may be wrong for the next, so test your water and ask the maker of the machine you buy.

Food Code §§ 5-202.15 and 5-204.13 call for replaceable filter elements, located where they can be serviced. Our ice machine water filter guide covers related cartridge questions.

What about refrigeration, ice and sinks?

Food Code § 3-501.16 sets 41°F or less for cold holding of time/temperature control food, so test a used milk refrigerator against that number. Sizing help is in our commercial refrigerator size guide, and you can browse used commercial refrigeration. Before a used ice machine goes into service, follow how to clean a commercial ice machine.

The Food Code is a model that jurisdictions choose to adopt, so your local rules govern. In the 2026 edition:

  • § 4-301.12 calls for a sink with at least three compartments for manual warewashing, unless the regulator approves an alternative under ¶ (C).
  • §§ 5-203.11 and 5-204.11 call for handwashing sinks located for convenient use in food preparation, dispensing and warewashing areas.
  • § 5-203.13 calls for a service sink or curbed cleaning facility for mop water.

Confirm counts and locations with your health department before you buy. Our bar equipment list goes further into sink details.

What should you check on used pieces?

Food Service Surplus connects buyers and sellers. It doesn't inspect, test, ship or guarantee equipment, so get these answers from the seller:

  • Data plate photo: model, voltage, watts and group count, matched against your circuit.
  • Water history: filter or softener type, change frequency and descaling records.
  • Live demonstration: boiler reaching pressure, every group brewing, steam wands working, no leaks.
  • Included parts: Rancilio's sheet lists two double portafilters, rubber blind disks, a manual and foot extensions in the box for a 2-group.
  • Grinders: burr age or replacement date, and grind adjustment.
  • Brewers: scale in the tank, sprayhead condition, funnels and servers.
  • Refrigeration: a running temperature reading.
  • Removal: who disconnects it and who loads it.

Our guide to buying used restaurant equipment adds general questions.

What commonly costs extra?

Plan for these separately from the machine:

  • Electrical: a circuit and receptacle sized from the data plate. La Marzocco's guide says the plug isn't provided.
  • Plumbing: a cold line with shut-off, a drain within the listed distance and any backflow device your jurisdiction requires (Food Code § 5-203.14).
  • Water treatment: the system, plus ongoing cartridges.
  • Installation: Zuccarini warns that an unprepared site brings delays and extra service and travel charges.
  • Counter work: cutting the hole and fitting the pump box and filter below.
  • Freight: Rancilio's 2-group ships at 189 lb in a 35 x 26 x 29 inch package. Check your route with the equipment doorway fit calculator.

Once the line is running, the food cost calculator helps you price drinks.

Seller checklist for coffee equipment

  • Brand, exact model and serial number, with a data plate photo.
  • Voltage, watts, phase, plug or terminal connection.
  • Group count, boiler size and water connection type.
  • Age, service records and water treatment history.
  • Whether it was running when removed.
  • Accessories included, such as portafilters, airpots, servers, hoses and filters.
  • Dimensions, weight and pickup details, including stairs or a loading dock.

Sellers can list equipment through sell used restaurant equipment, and smaller items fit restaurant smallwares.

Frequently asked questions

What equipment do you need to open a coffee shop?

The core list is an espresso machine, grinders, a batch brewer with airpots or servers, water filtration, refrigeration, ice, three-compartment and handwashing sinks, and smallwares. Your menu and health department can add to it.

Does a 2-group espresso machine need 220V?

The full-size 2-group machines cited here run on 220 V or a 208-240 V range. Rancilio's Classe 5 USB 2-group Compact can be special-ordered at 110 V, so check the data plate on the exact unit.

Does an espresso machine need a drain?

The plumbed machines cited here do. Requirements range from a 1" open gravity drain within 3 ft on Zuccarini's Appia sheet to a 2" ID drain within 4 ft on Rancilio's sheet, and La Marzocco shows a sloped line to a floor drain.

Do you need a water softener for an espresso machine?

It depends on your water and the machine. Rancilio calls for one above 3 GPG, while La Marzocco's target range is higher, so test first and follow the maker of your machine.

Is a used espresso machine a good idea?

In our judgment, it can be if you see service records, watch it run and can match its power and water needs to your site. Without a demonstration or a known water history, treat it as a repair project.

Sources