How to Clean a Commercial Ice Machine: Cleaner, Sanitizer and Schedule

How to clean a commercial ice machine: scale vs slime, cleaner vs sanitizer, and what Manitowoc, Hoshizaki and Scotsman say about schedule and chemicals.

By Food Service SurplusPublished 11 min read
Buyer guideEquipment

Cleaning a commercial ice machine is two separate jobs: descale the water system with the cleaner the manufacturer specifies, then sanitize it with the specified sanitizer, and never combine the two. Manitowoc's Indigo NXT manual and Scotsman's Prodigy Plus documents call for this at least every six months. Hoshizaki says at least once a year for KM cubers and at least twice a year for the F and FD models on its cleaning sheet #51055. The cleaning label inside the machine and the manual for your exact model override everything below, including the doses.

Advice written for countertop and home units does not necessarily apply to commercial machines. This guide uses each commercial manufacturer's own documents and keeps the brands separate, because their instructions differ.

What is the difference between scale and slime?

Scale is mineral buildup. Manitowoc describes it as lime scale (calcium) deposited from the water.

Slime and biofilm are biological growth. Manitowoc says sanitizer removes algae and slime growth and disinfects, and Scotsman describes its recommended sanitizer the same way. Both call out yeast. Manitowoc names bakeries as an example, and a Manitowoc product sheet adds sugar, flour and other airborne contaminants.

What is the difference between ice machine cleaner and sanitizer?

Ice machine cleaner (also sold as descaler or scale remover) is an acid. Manitowoc's bulletin MII-106 says its cleaner contains citric and phosphoric acid, which converts lime scale into a form water can flush away, though a 2013 data sheet for its 16 oz cleaner lists phosphoric and hydroxyacetic acid. Scotsman calls Clear 1 a food grade acid.

Sanitizer does a different job. Manitowoc says the two "perform two equally important, but separate functions." Hoshizaki's KM cleaning FAQ says descaling chemicals will not clear the algae and bacteria that can develop on the machine.

How often should you clean a commercial ice machine?

Treat these as starting points, then shorten the interval if your water or air calls for it.

Guidance Manitowoc Hoshizaki Scotsman
Documents used Indigo NXT manual (Rev 03, 2/18); bulletin MII-106 (9/13) KM cleaning FAQ; cleaning sheets #51001 (KM-340 to KM-901) and #51055 (F and FD models) Bulletin 2019-01; Prodigy Plus aid 291-856 and PM recommendations; BC0530 manual
Stated minimum Clean and sanitize at least every six months KM: at least once a year. Sheet #51055 models: at least twice a year Prodigy Plus: at least every 6 months. Bulletin: descale and sanitize at 6 month intervals
When to do it more often High mineral water; airborne yeast Undesirable or bad water High mineral water; airborne pollutants; yeast
Named cleaner Manitowoc Cleaner (part 9405463); "the only products approved" Hoshizaki Scale Away on both sheets; KM FAQ also recommends Lime-A-Way Scotsman Clear 1 (19-0653-01)
Named sanitizer Manitowoc Sanitizer (part 9405653), classed as no-rinse Chlorine bleach without additives, on the sheets checked Nu Calgon IMS (bulletin). BC0530 manual: 5-1/4% sodium hypochlorite
Evaporator statement "Nickel-plated copper" KM FAQ: stainless steel, nickel-safe cleaner "not required" Clear 1 is safe on nickel plated evaporators
Warranty position Routine maintenance is not covered Failures from scale or lack of maintenance are not warranty issues Damage from improper cleaning is not covered

More descaling is not automatically better. Scotsman warns that overuse of any acid cleaner may impact evaporator life. Manitowoc's 2013 bulletin says cleaner must not be used weekly or monthly and that intervals shorter than two months must be avoided, although a separate Manitowoc product sheet offers an optional automatic system that descales at programmed intervals up to monthly. If you seem to need a short cycle, the Indigo NXT manual says to have a qualified service company test the water and recommend treatment.

Filtration affects the schedule too. Scotsman's Prodigy Plus aid says to change water filters at least every 6 months, and Manitowoc highly recommends an approved filter with a polyphosphate scale inhibitor. See the ice machine water filter guide.

How do you clean a commercial ice machine, step by step?

This is the general shape of the job, not a substitute for your manual. Sequence, doses and cycle times change by model. Scotsman's Prodigy Plus aid says most of the maintenance should be performed by ice machine technicians, and lists filter changes, air filter cleaning and bin cleaning as jobs an owner can do.

  1. Find your model's instructions on the machine's cleaning label and in its manual.
  2. Clear the ice. Manitowoc says no ice may be on the evaporator during the cycle, and never to force it off. Empty the bin or dispenser and discard the ice.
  3. Run the descale cycle. Doses vary widely: 3 to 9 oz by model on Indigo NXT, and 14 fl oz of Scale Away for the KM models on sheet #51001. Prodigy Plus displays a code when it is time to add scale remover, then circulates and flushes on its own in about 35 minutes.
  4. Cut power and remove parts. Manitowoc requires disconnecting at the electric service switch box first. Parts typically include the curtain, water distributor and probes or sensors.
  5. Hand clean the parts. The Indigo NXT manual uses 16 oz of cleaner per gallon of lukewarm water, a soft nylon brush, sponge or cloth (not a wire brush), and a 5-minute soak, or 15 to 20 minutes for heavy scale. Then rinse with clean water.
  6. Clean the food zone, including side walls, base and the bin or dispenser. Hoshizaki's KM sheet specifies a neutral cleaner such as dish soap for the bin liner.
  7. Sanitize as a separate step. Follow the rinse instruction exactly. Manitowoc says not to rinse after sanitizing. Hoshizaki's KM sheet calls for three rinse cycles after bleach.
  8. Reassemble and restart. On the KM models on sheet #51001, the cleaning valve must be fully closed or the machine will not make ice.
  9. Discard the first ice. Manitowoc says all ice produced during cleaning and sanitizing must be discarded.
  10. Finish and log it. Check the filter and clean the condenser or air filter. Manitowoc's Indigo NXT manual says to clean the washable air filter once a month and the condenser at least every six months, and Scotsman lists both at six months or more often as needed. Record the date and products used.

What chemistry does each brand specify?

Manitowoc. The company says its evaporators are nickel-plated copper, and the manual says Manitowoc cleaner and sanitizer are the only products approved for its machines. It also says using these solutions in a manner inconsistent with their labeling violates federal law. Its powder descaler is for modular cubers only, not flaker, nugget or SM50 machines.

Hoshizaki. The KM FAQ says that because of the stainless steel evaporator, any commercial ice machine cleaner can be used and a nickel-safe type is not required. It recommends Lime-A-Way or Scale Away. That statement is about Hoshizaki's evaporator, so do not carry it over to a plated one. Hoshizaki's sheets also warn against ammonia-type cleaners.

Scotsman. Bulletin 2019-01 recommends Clear 1, described as safe on all ice machines including nickel plated evaporators, and Nu Calgon IMS as the sanitizer. It says bleach will damage the evaporator. However, the March 2020 manual for the BC0530 specifies a sodium hypochlorite sanitizing solution. The bulletin also defers to the machine's label or manual, so check those first and ask Scotsman if they conflict.

What does "nickel-safe" mean? It is a cleaner formulated for plated evaporators. Nu-Calgon describes its Nickel-Safe cleaner as a citric/phosphoric product for nickel-plated or tin-plated evaporators, introduced in collaboration with Manitowoc. Before buying a generic cleaner, confirm your evaporator type and whether your manufacturer approves that product at all.

Bleach is specified on some machines and prohibited on others, so never apply one brand's chemistry to another brand's machine.

Can you clean a commercial ice machine with vinegar?

Don't, unless your machine's manufacturer tells you to. None of the Manitowoc, Hoshizaki or Scotsman cleaning documents cited here mention vinegar, so it is not an instruction they give. They also leave little room for it:

  • Manitowoc approves only its own cleaner and sanitizer.
  • Scotsman says incorrect chemicals will damage the evaporator, and that this damage is not covered by warranty.
  • Hoshizaki names specific products and says any commercial ice machine cleaner can be used on its KM cubers, and vinegar is not among the products it names.

None of those documents name vinegar as a sanitizer either, and chemical sanitizers on food-contact surfaces have to meet the criteria in FDA Food Code 7-204.11.

Home-unit guidance is not a blanket yes either. Sub-Zero says to use only the cleaner and sanitizer made for its undercounter ice makers, and calls vinegar a last resort for the interior.

What are the chemical and electrical safety rules?

  • Never mix cleaner and sanitizer. Manitowoc says so directly, and Hoshizaki says mixing them "could be harmful." Clorox's bleach SDS says bleach reacts with acids to produce hazardous gases such as chlorine.
  • Wear protection. Manitowoc calls for rubber gloves and safety goggles or a face shield. Hoshizaki calls for liquid-proof gloves and goggles.
  • Read the SDS for your bottle. Scotsman's Clear 1 SDS says it causes severe skin burns and eye damage. A 2013 Manitowoc data sheet for its 16 oz cleaner lists a pH of 1 to 2 and says to add acid to water, not water to acid.
  • Disconnect power properly. The Indigo NXT manual warns that the power switch does not disconnect all incoming power, and that failing to disconnect at the main could cause serious injury or death.
  • Stay with an open machine. Hoshizaki warns not to leave the icemaker unattended with panels off.

What does the FDA Food Code say about ice machines?

The FDA Food Code is a model that jurisdictions may adopt, so check your own health department's version. In the 2026 edition, where these sections read the same as in 2022:

  • The definition of "food" includes ice, and section 3-202.16 says ice used as food or a cooling medium must be made from drinking water.
  • Section 4-602.11(E)(4) says ice bins and enclosed components such as ice makers must be cleaned at a frequency specified by the manufacturer, or, absent that, as often as needed to preclude accumulation of soil or mold.
  • Section 4-702.11 says food-contact surfaces must be sanitized before use after cleaning.

That manufacturer-frequency language is why the manual matters beyond machine performance.

What should you check when buying a used ice machine?

Food Service Surplus connects buyers and sellers. The platform does not inspect, test or guarantee equipment, so get these answers from the seller:

  • Model and serial number from the dataplate, which tell you which manual, chemicals and evaporator type apply.
  • Cleaning records, with dates, products and who did the work.
  • Scale and slime. Ask for photos of the evaporator, curtain, distributor and bin. Heavy scale can point to missed maintenance, and Hoshizaki says components that fail from scale buildup are not warranty issues.
  • A running demonstration. Ask to watch a full freeze and harvest cycle, on site or by video. Hoshizaki's FAQ links short freeze cycles and small cubes to a plugged filter or inlet screen. On Indigo NXT, Manitowoc sets the cube bridge at about 1/8 inch.
  • The water filter, including the last change date and whether it comes with the machine.
  • Idle time. Manitowoc's restoring-to-service bulletin for Indigo NXT recommends thorough maintenance by an authorized service company before a machine returns to use, and says water system parts may need inspection or replacement depending on water quality and idle time.

Confirm the machine fits your space with the equipment doorway fit calculator, and read buying used restaurant equipment for the wider checklist. Browse used commercial refrigeration or all restaurant equipment listings. If you are outfitting a full line, the commercial kitchen equipment checklist and commercial refrigerator sizes cover the rest of your plan.

Seller checklist for listing an ice machine

  • Brand, full model number and serial number, with a dataplate photo.
  • Ice type, voltage and condenser type (air, water or remote).
  • Whether the bin or dispenser is included.
  • Date and method of the last cleaning and sanitizing, with records if you have them.
  • Last filter change, and whether the filter housing is included.
  • Current photos of the evaporator, water curtain and bin interior.
  • Whether it was running when removed, and how long it has been out of service.
  • Who disconnects it, whether it will be cleaned first, and pickup or freight terms.

List through sell used restaurant equipment.

Sources