Bar Equipment List: Underbar, Refrigeration and Glassware Checklist
A bar equipment list with maker specs for ice bins, bar sinks, glass washers, back bar coolers and draft, plus FDA Food Code items and used-buying checks.
A bar equipment list comes down to an underbar line of ice bin, speed rail, three-compartment sink and handwashing sink, plus a glass washer, back bar cooler, draft system, POS and glassware. Plan drains and circuits first, because in the specs below a glass washer lists maximum overcurrent protection of 30 A at 208 V or 35 A at 230 V, while the cooler beside it runs on an ordinary plug.
The used-or-new column is our judgment, not a manufacturer recommendation or a code ruling.
| Item | What it does | Specs to check | Used or new (our judgment) |
|---|---|---|---|
| Underbar ice bin or cocktail station | Holds drink ice, sometimes chills soda lines | Length, bin depth, drain size and position, cold plate circuits | Reasonable used if the liner, drain and cold plate don't leak |
| Speed rail | Keeps pour bottles within reach | Single or double, length, mounting fit | Reasonable used; few parts to fail |
| Three-compartment bar sink | Manual washing, rinsing, sanitizing | Bowl size, drains, faucet centers, drainboards | Reasonable used if welds and faucet are sound |
| Handwashing sink | Hand hygiene station | Location, hot and cold supply, drain, local code | Reasonable used, but new is often simpler to get approved |
| Glass washer | Washes and sanitizes glassware | Voltage, ampacity, water connection, drain, door swing | Used only with a readable data plate and a demonstration |
| Back bar cooler | Holds bottles and cans | Footprint, plug, door type | Reasonable used if it holds temperature |
| Kegerator or direct-draw cooler | Keeps kegs cold at the tap | Keg count, footprint, plug, drain fitting | Reasonable used if it holds temperature |
| Draft tower, faucets and couplers | Dispenses beer | Faucet count, coupler type, condition | Reasonable used if disassembled and cleaned |
| Beer lines | Carry beer from keg to faucet | Line type, length, age | Buy jumper and direct-draw lines new |
| POS | Rings and tracks sales | Software account, payment terms, hardware support | Buy new, or confirm the hardware can transfer |
| Glassware and bar smallwares | Serve and build drinks | Capacity, chips, case counts | Reasonable used if free of chips and cracks |
For a full kitchen, use the commercial kitchen equipment checklist. Buyers can browse used beverage equipment and the wider restaurant equipment category.
What utilities should you plan first?
These examples show how much requirements differ along one bar. Pull the sheet for your exact model.
| Example model | Electrical | Water | Drain | Size (in) |
|---|---|---|---|---|
| Krowne 18-24 ice bin | None listed | None listed | 1" IPS | 24 long; inside bin 15 x 22, 12 deep |
| Krowne 18-24-7 ice bin with 7-circuit cold plate | None listed | Soda lines through cold plate | 1/2" IPS, 1/2" x 4" PVC tailpiece | 24 long; inside bin 15 x 22, 12 deep |
| Krowne 18-33 three-compartment bar sink | None | 4" center wall mount faucet | Three drains; 1-1/2" on the product page, while the sheet shows both 1" and 1-1/2", so confirm before rough-in | 36 on the sheet, 38-1/2 on the product page; 18-1/2 deep; bowls 10 x 14 x 10 |
| Jackson Delta HT-E-SEER-S glass washer | 208 V: 26.3 A load, 30 A max overcurrent. 230 V: 29.2 A load, 35 A max overcurrent | 3/4" male GHT to a true 1/2" ID line, 40-90°F, 10 psi flow | 5/8" ID hose into a 1-1/2" minimum drain with air gap | 24-1/4 W x 26-7/8 D x 36-1/4 H |
| True TBB-24-48-S-HC back bar cooler | 115 V, 2.1 A, NEMA 5-15P | None | None listed | 49-1/8 L x 24-1/2 D x 35-5/8 H, plus 1" rear bumper |
| True TDD-2CT-HC direct-draw dispenser | 115 V, 2.8 A, NEMA 5-15P | None | 1/2" barbed T fitting | 58-7/8 W x 27-1/8 D x 38-1/2 H |
Our NEMA plug chart explains the plug codes.
How should you lay out the underbar?
In our judgment, build the station around the drink path: ice in the middle, bottles at the front, a sink and glass storage to one side and a handwashing sink within a step. Check three published measurements on your floor plan:
- Ice bin drain: Krowne lists left side to drain for each model, 12" on the 24" 18-24, so the rough-in has to match the bin.
- Door swing: Jackson lists the Delta at 40-7/8 inches deep with the door open, so measure the aisle at that depth.
- Height: The Delta stands 36-1/4 inches tall, so check it against the counter above.
Krowne lists single and double speed rails in 24", 30" and 36" lengths as optional accessories for its bins, along with bottle wells, so check what a used bin includes.
What does the FDA Food Code say about bar sinks?
The Food Code is a model offered for adoption, so state and local rules govern and your inspector has the final word. In the 2026 edition:
- Three compartments: § 4-301.12(A) calls for at least three compartments for manual washing, rinsing and sanitizing, unless an approved alternative under ¶ (C) applies.
- Bowl size: § 4-301.12(B) requires compartments large enough to immerse the largest equipment and utensils, so measure your largest pitcher against the bowl.
- Drainboards: § 4-301.13 calls for drainboards, racks or tables for soiled and clean items. Krowne's 18-33 has no drainboards, while its 60" 18-53C lists 13" ones, so a short sink may need space beside it.
- Handwashing: §§ 5-203.11 and 5-204.11 call for handwashing sinks located for convenient use in food preparation, dispensing and warewashing areas. § 5-205.11 bars any other use, so one can't double as a dump sink.
- Drains: § 5-402.11 bars a direct sewage connection from equipment holding food or utensils, with limited exceptions where law allows. Ask your plumber which drains need an air gap.
On our reading, a glass washer doesn't by itself remove the sink. § 4-301.12(A) covers manual washing, ¶ (C) lists only manual alternatives, and the Code doesn't say whether a bar that washes nothing by hand still needs one. Ask your health department before you drop the sink.
What rules apply to the ice bin?
- Cooling ice isn't drink ice: § 3-303.11 says ice used to cool canned beverages and other packaged foods, or equipment coils and tubes, may not then be used as food.
- Cold plates: § 4-204.16 keeps beverage tubing and cold plates out of contact with stored ice, unless the plate is built integrally into the bin.
- Cleaning: ¶ 4-602.11(E)(4) puts ice bins, beverage nozzles and dispensing lines on the manufacturer's schedule or, without one, often enough to prevent soil or mold.
- Carbonators: § 5-203.15 sets backflow requirements for carbonating devices.
Krowne says the PVC tailpiece on its cold plate bins is required to avoid condensation through metal-to-metal contact, so confirm a used unit still has one. For the machine feeding the bin, see how to clean a commercial ice machine.
What should you know about glass washers?
Food Code § 4-204.113 requires a readable data plate with operating specs. § 4-501.112 sets a minimum sanitizing rinse of 165°F for stationary-rack, single-temperature machines and 180°F for others, with a 194°F ceiling.
Jackson's Delta lists minimums of 155°F wash and 180°F rinse, with a built-in booster on a single cold water connection. It's rated at 24 racks per hour and 0.60 gallons per rack, with 12" of inside clearance, so measure your tallest glass. Browse used commercial dishwashers and cleaning equipment for options.
Which back bar cooler and draft setup do you need?
True's TBB-24-48-S-HC sheet (rev. 3/17) says the system holds 33°F to 38°F and is NSF/ANSI Standard 7 compliant for packaged and bottled product. See commercial refrigerator sizes for other footprints and used commercial refrigeration for listings.
For draft, the Brewers Association's Draught Beer Quality Manual (fourth edition, 2019) describes:
- Direct draw: Kegs sit close to the faucet, in a keg box under the counter or a walk-in sharing a wall with the bar.
- Air-cooled long draw: Maximum recommended distance is 25 ft for double-duct and 15 ft for single-duct.
- Glycol long draw: For runs longer than 25 ft, with a separate chiller and an insulated trunk line.
- Temperature: Store beer at 34°F to 38°F and serve it at 38°F to 44°F.
True's TDD-2CT-HC holds 2 half barrels at 33°F to 38°F and comes with two insulated 3" beer columns and a two-way tapper manifold. Its included list doesn't name a CO2 tank, regulator or couplers, so ask. Our keg size guide covers keg dimensions.
What about POS and glassware?
This is our judgment, not a maker spec. A used POS terminal only helps if the software and payment processing can transfer. Buy glassware by your drink list. Our shot glass size guide covers pour volumes, and restaurant smallwares is the place to look for bar tools.
What should you check on used pieces?
Food Service Surplus connects buyers and sellers. It doesn't inspect, test, ship or guarantee equipment, so get these answers from the seller:
- Sinks and bins: Photos of welds, liners, drains and faucets, plus cold plate circuit count and any sign of leaks.
- Glass washers: Data plate photo, temperatures in a live cycle, chemical pumps and service records.
- Refrigeration: A temperature reading after a full run, plus door gaskets.
- Draft: What was poured. The manual says to replace vinyl jumpers and direct-draw lines every one to two years and long-draw trunk line at 10 years or more, and that root beer, flavored beers, margaritas, wines or ciders can permanently contaminate a line.
Our guide to buying used restaurant equipment adds general questions. Check delivery routes with the equipment doorway fit calculator, since True lists the back bar cooler at 295 lb crated and Jackson ships the Delta at 296 lb.
What commonly costs extra?
- Electrical: A circuit for the glass washer, sized from the data plate. Ask your electrician whether it must be dedicated.
- Plumbing: Supply lines, drains, air gaps and any backflow device your jurisdiction requires (Food Code § 5-203.14).
- Machine options: Jackson lists a Scale Prevention System and a Drain Water Tempering Kit as options, and True says upcharges and lead times may apply to its legs, castors and double or triple headed draft columns.
- Bin options: Krowne lists speed rails, bottle wells and a 10-circuit cold plate upgrade as options.
- Draft: A glycol chiller and trunk line on long runs, CO2 or mixed gas with regulators and lines, and installation.
- Fuel gas: The pieces cited here list no fuel gas connection. If you add a kitchen, plan for it separately.
Seller checklist for bar equipment
- Brand, exact model and serial number, with a data plate photo.
- Voltage, amps and plug type, or "no electrical" for sinks and bins.
- Length, depth, height, and drain size and position.
- Cold plate circuits, speed rails and accessories included.
- Glass washer temperatures and service history.
- Draft: keg capacity, columns, what was poured and line age.
- Pickup access, weight and who handles disconnection.
Sellers can list pieces through sell used restaurant equipment. Opening a cafe instead? See our coffee shop equipment list.
Frequently asked questions
What equipment does a bar need?
The core list is an ice bin, speed rail, three-compartment sink, handwashing sink, glass washer, back bar cooler, draft system, POS and glassware. Your menu and health department can change it.
Does a bar need a three-compartment sink if it has a glass washer?
The FDA model Food Code's § 4-301.12 calls for a three-compartment sink for manual washing, rinsing and sanitizing, unless an approved manual alternative applies. It doesn't say a glass washer replaces the sink, or whether a bar that washes nothing by hand needs one. Local rules govern, so ask your health department.
Can you keep bottled beer in the drink ice bin?
Food Code § 3-303.11 says ice used to cool canned beverages or other packaged foods may not then be used as food. Keep the two uses separate, and check your local rule.
How often should draft lines be cleaned?
The Brewers Association manual says at least every two weeks with a caustic cleaner, with faucets fully disassembled and cleaned.
Is used bar equipment worth buying?
In our judgment, simple stainless pieces like ice bins, sinks and speed rails are the safest used purchases. Be stricter with glass washers and refrigeration, and buy beer lines new.
Sources
- FDA: Food Code 2026 and full PDF (§§ 3-303.11, 4-204.16, 4-204.113, 4-301.12, 4-301.13, 4-501.112, 4-602.11, 5-203.11, 5-203.14, 5-203.15, 5-204.11, 5-205.11, 5-402.11)
- Krowne: Standard Series underbar ice bins sheet, rev. 2/2019 (PDF), Silver Series bar sinks sheet, rev. 11/2024 (PDF) and 18-33 product page
- Jackson WWS: Delta HT-E-SEER-S spec sheet, June 2023 (PDF)
- True Manufacturing: TBB-24-48-S-HC spec sheet, rev. 3/17 (PDF) and TDD-2CT-HC product page
- Brewers Association: Draught Beer Quality Manual, fourth edition, 2019 (PDF)
Related guides
- Coffee Shop Equipment List: What You Need, New or Used
A coffee shop equipment list with maker specs for espresso machines, grinders and brewers, utilities to plan first and what to check on used pieces.
- Commercial Refrigerator Sizes: Reach-In, Undercounter, Prep and Back Bar
Commercial refrigerator sizes from manufacturer spec sheets: reach-in, undercounter, chef base, prep and back bar dimensions, plus clearances and plugs.
- How to Clean a Commercial Ice Machine: Cleaner, Sanitizer and Schedule
How to clean a commercial ice machine: scale vs slime, cleaner vs sanitizer, and what Manitowoc, Hoshizaki and Scotsman say about schedule and chemicals.