Coffee and Paper Cup Sizes Chart: Ounces, Dimensions and Lid Fit
Coffee and paper cup sizes with maker specs: ounces, top diameter, height, case pack and lid fit, plus cold cup rim sizes and surplus lot checks.
Dart, Pactiv Evergreen and Karat all list paper coffee cups in 4, 8, 10, 12, 16 and 20 ounce sizes, and in Dart's Solo specs the top diameter runs from 2.47 inches on the 4 oz cup to 3.54 inches on the 12, 16 and 20 oz cups. Lids follow that rim diameter, not the ounces, so two 10 oz cups can take different lids.
Dimensions vary by maker. The documents we read don't describe an industry-wide standard, so the manufacturer and item number decide what fits, not the words "12 oz."
Coffee cup sizes chart: hot paper cups
These are Dart's white Solo single-sided poly cups, with specs from each product page and case packs from those pages and Dart's lid sheet. Millimeter figures are our rounded conversion.
| Size | Dart item | Practical / flush fill (fl oz) | Top diameter, in (mm) | Height (in) | Case pack | Listed dome lid (lid diameter, in) |
|---|---|---|---|---|---|---|
| 4 oz | 374W-2050 | 4 / 3.93 | 2.47 (63) | 2.39 | 1,000 | None listed on the page |
| 8 oz | 378W-2050 | 8 / 9.36 | 3.15 (80) | 3.70 | 1,000 | TL38R2-0007 (3.21) |
| 10 oz | 370W-2050 | 10 / 11.35 | 3.35 (85) | 3.82 | 1,000 | TL31R2-0007 (3.41) |
| 10 oz, shorter and wider | 510W | 10 / 11.8 | 3.54 (90) | 3.61 | 1,000 | TLP316-0007 (3.66) |
| 12 oz | 412WN-2050 | 12 / 14.25 | 3.54 (90) | 4.38 | 1,000 | TLP316-0007 (3.66) |
| 16 oz | 316W-2050 | 16 / 17.45 | 3.54 (90) | 5.33 | 1,000 | TLP316-0007 (3.66) |
| 20 oz | 420W-2050 | 20 / 20.19 | 3.54 (90) | 5.87 | 600 | TLP316-0007 (3.66) |
Dart also lists 6 and 24 oz cups in this line.
How do other paper cup makers list the same sizes?
Each maker publishes different fields, so these columns don't line up exactly.
| Size | Pactiv Evergreen item, listed dimensions (in), case pack, dome lid | Karat item, listed diameter, case pack, lid | Dixie item, case pack, lid |
|---|---|---|---|
| 4 oz | D4HCW, 3.375 x 2.5, 1,000, DDL4WD | KE-K504W (compostable), 62 mm, 1,000 | Not checked |
| 8 oz | D8HCW, 3 x 3.5, 1,000, DDL8WD | C-K508W, 80 mm, 1,000, C-KDL508W-PP | 2338W, 1,000, 9538 series |
| 10 oz | D10SHCW, 3.5 x 3.75, 1,000, DDL124WD | C-K510W, 90 mm, 1,000, C-KDL516W-PP | 2340W, 1,000, D9540 |
| 12 oz | D12THCW, 3.5 x 4.4, 1,000, DDL124WD | C-K512W, 90 mm, 1,000, C-KDL516W-PP | 2342W, 1,000, D9542 |
| 16 oz | D16HCW, 3.5 x 5.3125, 1,000, DDL124WD | C-K516W, 90 mm, 1,000, C-KDL516W-PP | 2346W, 1,000, 9542 series |
| 20 oz | D20HCW, 5.875 x 3.375, 500, DDL124WD | C-K520W, 90 mm, 600, C-KDL516W-PP | Not checked |
Pactiv Evergreen's pages don't label which number is which. D20HCW's 5.875 looks like its height, and the D4HCW figures are unclear, so ask for a measured rim. GP PRO's Dixie pages show 0.000 for cup dimensions, and of the four we read only 2346W gives a stacked-sleeve size, so we left out Dixie top diameters and heights.
What sizes and rims do cold plastic cups use?
Clear PET cups group into rim families, and each family has its own lid series. Dart publishes the fullest numbers:
| Size | Dart PET item | Practical / flush fill (fl oz) | Top diameter, in (mm) | Height (in) | Case pack | Straw-slotted lid |
|---|---|---|---|---|---|---|
| 9 oz tall | TP9D | 9 / 9.1 | 3.10 (79) | 3.79 | 1,000 | 610TS |
| 9 oz squat | TP9R | 9 / 9.3 | 3.64 (92) | 2.82 | 1,000 | 662TS |
| 12 oz | TP12 | 12 / 14.4 | 3.65 (93) | 4.17 | 1,000 | 662TS |
| 16 oz | TP16D | 16 / 18.3 | 3.88 (99) | 4.72 | 1,000 | 626TS |
| 20 oz | TP20 | 20 / 20.3 | 3.88 (99) | 5.39 | 600 | 626TS |
| 24 oz | TD24 | 24 / 24.1 | 3.88 (99) | 6.00 | 600 | 626TS |
| 32 oz | TC32 | 32 / 34.4 | 4.22 (107) | 6.89 | 300 | 636TS |
Two other makers show the same families. The grouping is ours, based on published lid matches and rim figures. For Kal-Clear we read the first number on its sheet as top diameter, because it tracks the lid sizes.
| Rim family | Dart PET | Fabri-Kal Kal-Clear (flat lid, lid size) | Karat PET (a listed lid) |
|---|---|---|---|
| About 3.1 in, 78 mm | TP9D | KC9T, KC10 (LKC9/10F, 3.2 in) | C-KC8, 78 mm (C-KC78TS) |
| About 3.6 in, 92 mm | TP9R, TP12 | KC9OF, KC1214CL (LKC12/20F, 3.8 in) | C-KC9, C-KC12-S, 92 mm (C-H662TS-A) |
| About 3.9 in, 98 mm | TP16D, TP20, TD24 | KC12SNT, KC16T, KC20, KC24 (LKC16/24F, 4.0 in) | C-KC12, C-KC16, C-KC24, 98 mm (C-KC626TS) |
| About 4.2 in, 107 mm | TC32 | KC32 (LS636FX, 4.4 in) | C-KC32, 107 mm (C-KDL107) |
Polypropylene adds other rims. Karat lists a 16 oz PP U-rim cup at 95 mm (C1011, lids C1041 and C3000), a 16 oz tall PP cup at 90 mm (C-TPP16C, lids such as C-TPPLC) and a 32 oz PP cup at 104.5 mm (C-KPP32). Karat's 90 mm PP cup and 90 mm paper cups list different lids, so a matching millimeter figure doesn't settle fit on its own.
Why do lids fit by rim diameter, not ounces?
A taller cup holds more through the same opening. Dart's 12, 16 and 20 oz paper cups all share a 3.54-inch top. The reverse also happens. Dart's two 9 oz PET cups have tops of 3.10 and 3.64 inches and use different lids, Karat sells a 12 oz PET cup at both 92 mm and 98 mm, and Kal-Clear's KC1214CL and KC12SNT are both 12/14 oz cups on different lid series.
Lid names can mislead too. Dart's "5-20 oz" PET lid fits TP12, and its "12-24 oz" PET lid fits TP16D, so both names cover 12 oz and 20 oz but don't describe the same rim.
Why might 10, 12 and 16 oz cups share a lid?
They share one only when the maker built them on one rim, and that happens within a series:
- Dart Solo: Its category page says one lid fits five cups, from a 10 oz squat to 24 oz. Its lid sheets list OPT316 and TLP316-family lids for 510W, 412WN, 316W and 420W. The 370W, with its narrower 3.35-inch top, isn't in that group.
- Pactiv Evergreen: DDL124WD is sold for 10 to 24 oz paper hot cups, while DDL8WD is for 8 oz.
- Karat: One 90 mm lid family covers its 10 to 24 oz paper cups.
- Dixie: The 10 oz 2340W uses D9540, while the 12 and 16 oz cups use the 9542 series. TP9542, which GP PRO lists as discontinued, was compatible with Dixie 12 to 20 oz hot cups and 10 to 20 oz PerfecTouch cups.
Sharing doesn't cross brands by default. Karat says its 98 mm flat lid can also fit other name-brand cups with a 98 mm diameter, but that is Karat's claim. Test a sample before relying on a mixed pairing.
Nominal size vs brim volume: is a 12 oz cup really 12 ounces?
Dart is the one maker here that publishes two numbers. "Practical fill" matches the size on the label, while "flush fill" is larger for most items. The 412WN-2050 is 12 and 14.25 fluid ounces, and TP16D is 16 and 18.3. Dart's page doesn't define the terms. We read flush fill as level with the rim and practical fill as a working fill.
The gap isn't constant. The 420W-2050 is only 20 and 20.19, and TD24 is 24 and 24.1, so by our reading those labels leave little headroom. The 374W-2050 lists flush fill (3.93) below practical fill (4), which we can't explain. The Pactiv Evergreen and Karat pages we read give one capacity, so don't compare headroom across brands.
Single wall, double wall or a sleeve?
Pactiv Evergreen's DSLVBRN and DSLVW sleeves come 1,000 to a case, and the maker says "one size fits most standard size hot cups" without listing sizes.
Double-wall and insulated cups are marketed to skip the sleeve: Dart's ThermoGuard, Georgia-Pacific's Dixie PerfecTouch and Karat's insulated cups all make that claim. Lids differ by maker:
- Dart: ThermoGuard DWTG12W has a 3.66-inch top, against 3.54 for the single-wall 412WN-2050, and its page lists only the ThermoGuard lid series, such as TL1224TG at 3.78 inches. Case counts differ too: 600 cups and 1,200 lids.
- Dixie: PerfecTouch 10 to 20 oz cups use large lids such as D9542, and the 5342CD case holds 1,000.
- Karat: Insulated C-KIC512W uses the same 90 mm lids as its single-wall cups, in a 500-count case.
How do you compare surplus cup lots?
Count usable cup-and-lid sets, because a lid from the wrong series is worth nothing to the cups in that lot. These prices are invented for the arithmetic:
| Offer | Cups | Fitting lids | Delivered price | Usable sets | Cost per set |
|---|---|---|---|---|---|
| 1 | 1,000 | 1,000 | $110 | 1,000 | $0.11 |
| 2 | 2,000 | 1,000 | $150 | 1,000 | $0.15, plus 1,000 spare cups |
| 3 | 1,000 | 0 (wrong series) | $80 | 0 until lids are sourced | Not comparable yet |
| 4 | 600 double wall | 1,200 | $140 | 600 | $0.23, plus 600 spare lids |
If Offer 3 needs 1,000 lids at an invented $45, its total is $125, or $0.125 per set. That beats Offer 2 and loses to Offer 1. Subtract any opened or short sleeves first, since Dart's cups ship in sleeves of 25, 30, 40 or 50 depending on the item. Run your own numbers in the unit price calculator.
What should you check before buying surplus cups?
Food Service Surplus connects buyers and sellers. The platform does not inspect, test or guarantee cups, so get these answers from the seller:
- Printed logos. Dart and Pactiv Evergreen both offer custom printing, so a lot may carry another business's name. Ask for a photo.
- Lid item number. Get the lid SKU from the case label and confirm it is on the maker's match list. A discontinued lid such as TP9542 may be hard to replace.
- Sealed sleeves. Ask how many cases and sleeves are unopened. Cups touch the drink and the mouth, so in our view opened sleeves deserve extra questions about storage.
- Hot or cold rating. Don't assume from the material.
| Item | Maker's listed use or range |
|---|---|
| Dart Solo paper | Hot, 32°F to 205°F |
| Karat paper | 32°F to 203°F, not microwave safe |
| Pactiv Evergreen paperboard | 32°F to 190°F |
| Dixie paper | Tested with hot liquid up to 212°F, no tests above that |
| Pactiv Evergreen HIPS dome lid | 0°F to 180°F |
| Dart Ultra Clear PET | Cold, -4°F to 151°F |
| Kal-Clear PET | -20°F to 150°F |
| Karat tall PP | Cold and warm drinks, up to 248°F |
"Paper" doesn't mean hot: Dart's lid page also lists paper cold cups. A lid can be rated lower than its cup, as Pactiv Evergreen's is, and we'd treat the lower number as the limit for the set. Pactiv Evergreen says its guidelines don't replace testing under your own conditions.
Browse disposable cups and lids or the wider food packaging and disposables category. Related guides cover takeout containers, deli containers, paper bags and a coffee shop equipment list.
Seller checklist for listing cups and lids
- Manufacturer, item number and a photo of the case label.
- Cup type: single wall, double wall, PET or PP, plus hot or cold use.
- Size in ounces, plus measured top diameter and height if there's no readable label.
- Cases, count per case, count per sleeve and total units.
- Lid item number, lid count and whether lids are in the same lot.
- Sealed or opened cases and sleeves.
- Any printed logos or artwork, with photos.
- Whether the lot splits, plus storage conditions and pickup or freight terms.
Sellers can list extra cases through sell surplus restaurant supplies.
Frequently asked questions
What are the standard coffee cup sizes?
Dart, Pactiv Evergreen and Karat all list 4, 8, 10, 12, 16 and 20 oz paper hot cups, and Dart and Karat also list 24 oz. The numbers are each maker's own, and the documents we read don't describe an industry-wide standard for dimensions.
Do 12 oz and 16 oz paper cups use the same lid?
Within one series, they often do. Dart, Pactiv Evergreen, Karat and Dixie each list one lid family for their 12 and 16 oz paper cups. Don't assume that carries over to another brand or to a double-wall line.
What size lid fits a 10 oz paper coffee cup?
It depends on the item. Dart's 370W-2050 takes a 10 oz lid and its 510W takes a 10-24 oz lid, and Dixie's 2340W takes D9540, which isn't its 9542 large lid. Check the item number or measure the rim.
What is the rim size of a 16 oz clear plastic cup?
Listed figures are close to 98 mm in PET. Karat lists 98 mm for C-KC16, Dart lists 3.88 inches for TP16D, and Kal-Clear's KC16T sheet starts with 3.9 inches. Karat's PP cups differ, at 90 mm and 95 mm.
Can you serve hot coffee in a clear plastic cold cup?
Not per the PET specs here. Dart lists its Ultra Clear PET cups for cold use with a 151°F maximum, and Pactiv Evergreen rates Kal-Clear PET to 150°F. Karat's tall PP cup is listed for warm drinks, so check the exact item.
Sources
- Dart paper hot cups: Solo category, 374W-2050, 378W-2050, 370W-2050, 510W, 412WN-2050, 316W-2050, 420W-2050
- Dart lids: TLP316-0007, TL38R2-0007, TL31R2-0007, 626TS, reclosable lid use-with sheet, 2023, distributor copy (PDF), Optima lid sheet, 2025, distributor copy (PDF)
- Dart ThermoGuard: category, DWTG12W, DWTG24W, TL1224TG
- Dart Solo Ultra Clear PET: category, TP9D, TP9R, TP12, TP16D, TP20, TD24, TC32
- Georgia-Pacific GP PRO (Dixie): 2338W, 2340W, 2342W, 2346W, 5342CD, D9542, TP9542
- Pactiv Evergreen hot cups: Hot drink cups, lids and sleeves sheet (PDF), D4HCW, D8HCW, D10SHCW, D12THCW, D16HCW, D20HCW, DDL8WD, DDL124WD, DSLVBRN
- Fabri-Kal Kal-Clear (Pactiv Evergreen): Cups and lids sheet, 2024 (PDF), 9502040, 9502095, 9502122, 9508067
- Karat paper cups (LollicupStore): KE-K504W, C-K508W, C-K510W, C-K512W, C-K516W, C-K520W, C-KIC512W, C-KDL516-E lid, C-KDL508W-PP lid
- Karat plastic cups (LollicupStore): C-KC8, C-KC9, C-KC12-S, C-KC12, C-KC16, C-KC24, C-KC32, C-KC626TS lid, C1011, C-TPP16C, C-KPP32
Related guides
- Foam Container Bans by State: Where Polystyrene Takeout Is Restricted
State-by-state foam container bans from statutes and agencies: who is covered, sale rules, dates and exemptions. Last reviewed November 9, 2026.
- Aluminum Foil Pan Sizes Chart: Full, Half and Third Steam Table Pans
Foil pan sizes with manufacturer dimensions, depths and capacities for steam table and carryout pans, plus lids, gauge and surplus buying checks.
- Paper Bag Sizes Chart: Kraft Bag Numbers, Dimensions and Capacity
Paper bag size chart with maker dimensions and basis weights for #2 to #25 kraft SOS bags, plus sacks, handle bags and surplus buying checks.