Ice Machine Water Filters: Types, Micron Ratings, Flow and When to Change
How to choose a commercial ice machine water filter: published flow, capacity and micron specs, NSF listings, change intervals and used-system checks.
A water filter for an ice machine is usually a sealed cartridge on a wall-mounted head. It traps sediment, reduces chlorine taste and odor, and in many commercial systems feeds a scale inhibitor. To choose one, match the machine's daily ice production to the filter's published range, then check maximum flow, rated gallons, connection size and your water hardness. Change it on the manufacturer's schedule, which ranges from six months to 12 months in the product lines below.
A filter is not a softener or a reverse osmosis system, and it does not replace cleaning. Specs vary between model generations, so the exact model number and cartridge label are the source of truth.
What does an ice machine water filter do, and what doesn't it do?
Many commercial systems combine three functions in one cartridge, although Hoshizaki's H9320 sheet claims lime scale reduction without naming an inhibitor:
- Sediment removal (the micron rating). The media mechanically traps dirt and particles. Hoshizaki rates its H9320 filters at 1 micron nominal. Pentair rates its Everpure i2000² and i4000² cartridges at 0.2 or 0.5 micron depending on the document.
- Chlorine, taste and odor reduction. Manitowoc lists a 95% average chlorine reduction for Arctic Pure Plus. Hoshizaki's H9320 spec sheet lists 97.3%, though its product pages also show 93.7%.
- Scale inhibition. Manitowoc says Arctic Pure Plus cartridges use a slowly soluble polyphosphate to inhibit scale and corrosion. 3M says its ICE series cartridges have a built-in scale inhibitor that reduces hard scale on evaporator plates. Pentair describes phosphates as keeping minerals suspended in solution.
That last point matters. An inhibitor leaves the hardness minerals in the water and tries to keep them from forming scale. Other equipment works differently:
- A softener swaps hard ions for sodium. Pentair notes that a softener does not filter water, so it still leaves sediment and chlorine to deal with. Hoshizaki's service FAQ also warns that softener salt can form an invisible coating on evaporator plates.
- Reverse osmosis (RO) removes the minerals rather than exchanging them. Check the ice machine's manual before feeding one with softened or RO water. This guide did not find a clear statement from Manitowoc or Hoshizaki on either.
A filter also does not make unsafe water safe. All four manufacturers warn against using these systems with water that is microbiologically unsafe or of unknown quality without adequate disinfection. Machines still need regular cleaning. Hoshizaki says at least once a year for KM cubers and at least twice a year for the F and FD models on its cleaning sheet #51055, and Manitowoc's Indigo technician's handbook says every six months. See how to clean a commercial ice machine.
How do you size a commercial ice machine water filter?
Check three numbers in this order.
1. Machine ice production. Manufacturers publish pounds-per-day ranges, and cubers and flakers often have different limits. Hoshizaki says its H9320 line is not recommended for flakers. 3M's older sheets give high-flow cubers much lower limits than low-flow cubers.
2. Service flow (gpm). This is the maximum rate the filter is rated to pass. Pentair says flow must not exceed the rated figure, and Manitowoc says its cyst claim only holds at or below rated flow. Manitowoc points buyers to the ice machine maker's technical publications for flow data. On water-cooled machines, Pentair says not to connect its systems to the condenser, and Manitowoc says the filter should feed only the potable water connection.
3. Rated capacity (gallons). Estimate your water use from the machine's spec sheet. Hoshizaki lists the KM-520MAJ at up to 556 lb of ice per 24 hours and 14.7 gallons of potable water per 100 lb at 90/70 conditions. Running flat out, that works out to about 82 gallons a day. This is a rough ceiling, because the two published numbers are not necessarily measured at the same conditions.
At that rate, a 9,000-gallon cartridge would reach capacity in about 110 days, before a six-month interval. An 18,000-gallon twin would last about 220 days, so the calendar would come first. A machine running well below capacity is more likely to hit the calendar limit first.
Published specs by model
| Model | Replacement cartridge | Max flow (gpm) | Rated capacity (gal) | Micron | Published machine range |
|---|---|---|---|---|---|
| Everpure Insurice Single PF-i2000² (EV9324-21) | EV9612-22, plus EV9534-26 prefilter | 1.67 | 9,000 | 0.2 | Cubers 750 lb/day, flakers 1,500 lb/day |
| Everpure Insurice Twin-i2000² (EV9324-02) | EV9612-22 | 3.34 | 18,000 | 0.5 on spec sheet, 0.2 on current product table | Cubers 1,450 lb/day, flakers 2,200 lb/day |
| Everpure Insurice Quad-i4000² (EV9325-04) | EV9612-32 | 6.7 | 48,000 | 0.5 on spec sheet, 0.2 on current product table | Higher-volume machines, no lb/day figure on sheet |
| 3M ICE120-S | HF20-S | 1.5 | 9,000 | 0.5 | Low-flow cubers 750 lb, high-flow cubers 200 lb, flakers 1,200 lb |
| 3M ICE140-S | HF40-S | 2.5 current, 2.1 on older sheet | 25,000 | 0.2 | Cubers 1,000 lb, flakers 1,800 lb (older sheet: high-flow cubers 600 lb) |
| Manitowoc AR-10000-P | K00493 | 0.75 | 15,000 | 0.5 | 0 to 600 lb/day |
| Manitowoc AR-20000-P | K00494 | 1.25 | 20,000 | 0.5 | 601 to 1,000 lb/day |
| Manitowoc AR-40000-P | K00495 | 2 | 40,000 | 0.5 | 1,001 to 2,500 lb/day |
| Hoshizaki H9320-51 | H9655-11 (4HC-H) | 2 | 21,000 | 1 nominal | Hoshizaki cubers under 900 lb/day |
| Hoshizaki H9320-52 | H9655-11 (4HC-H) | 4 | 42,000 | 1 nominal | Hoshizaki cubers 900 to 1,301 lb/day |
| Hoshizaki H9320-53 | H9655-11 (4HC-H) | 6 | 63,000 | 1 nominal | Hoshizaki cubers over 1,301 lb/day |
The 3M rows combine older spec sheets with current Solventum pages, which now host the 3M High Flow Series. The Manitowoc rows are from an October 2020 spec sheet. A twin is rated at double the single figures and needs a cartridge for each position at every change.
Finer is not automatically better for your site. 3M pairs its finer cartridges with most standard water and sells coarser versions, such as ICE145-S at 3.0 micron, for higher-turbidity water. Manitowoc and Hoshizaki both sell prefilters to extend the primary cartridge's life. Hoshizaki describes its Everpure E-10 and E-20 prefilters as 10 micron nominal, for areas with an unusual amount of dirt in the water.
How often should you change an ice machine water filter?
Follow the sheet for your model. Change at whichever limit comes first.
| Product line | Published change interval |
|---|---|
| Everpure Insurice i2000² and i4000² | Six-month maintenance program, or at rated capacity, or when pressure falls below 10 psi |
| Manitowoc Arctic Pure Plus | Every 6 months, or when pressure falls below 20 psi |
| 3M ICE120-S and ICE140-S | Every 12 months, at rated capacity, or when flow noticeably drops |
| Hoshizaki H9320 | At rated gallons, or every 6 to 12 months depending on usage and water condition |
Don't rely on flow alone. Manitowoc's manual gives three reasons a cartridge wears out: trapped sediment, exhausted carbon, and a scale inhibitor that has fully dissolved. Pressure and flow mainly reflect the first, so a cartridge can seem fine after its chemistry is spent. Record the install date at every change.
Why is water hardness the deciding factor?
Hardness tells you how much of the filter's job is scale control, so test before you choose. Manitowoc recommends having your water supply professionally tested. Hardness is reported in grains per gallon (gpg) or parts per million, and Pentair puts one gpg at 17.1 ppm.
| Hardness (mg/L as calcium carbonate) | USGS classification | Approximate gpg |
|---|---|---|
| 0 to 60 | Soft | Up to 3.5 |
| 61 to 120 | Moderately hard | 3.6 to 7 |
| 121 to 180 | Hard | 7.1 to 10.5 |
| Over 180 | Very hard | Over 10.5 |
Pentair's scale matches at the top end, treating 7 gpg or more as hard and above 10.5 gpg as very hard, though it reserves soft for under 1 gpg. With soft water, sediment and chlorine are likely to matter more than the inhibitor. As hardness climbs, scale control becomes the main purchase decision, and softening or RO may be worth pricing.
The filter spec sheets reviewed for this guide do not publish a hardness limit for their scale inhibitors. If your test comes back very hard, ask the filter manufacturer directly. Test for turbidity as well, since that is what separates 3M's standard and higher-turbidity cartridges.
What do NSF/ANSI 42 and 53 mean on an ice filter?
NSF describes Standard 42 as covering aesthetic, non-health contaminants such as chlorine, taste and odor, and particulates. Standard 53 covers specific health-related contaminants, such as lead and Cryptosporidium. Certification is claim by claim, so "NSF certified" alone tells you little. These are the listings checked in NSF's public database on November 9, 2026:
| Filter (NSF trade name) | NSF/ANSI 42 claims | NSF/ANSI 53 claims |
|---|---|---|
| Insurice PF Single and Twin, I2000² | Chlorine, taste and odor, nominal particulate Class I, bacteriostatic effects | Cyst, asbestos |
| Insurice Quad, I4000² | Same as above | Cyst |
| 3M/Solventum High Flow Series Ice HF20-S | Chlorine, taste and odor, nominal particulate Class I | Cyst |
| 3M/Solventum High Flow Series Ice HF40-S | Same as HF20-S, plus bacteriostatic effects | Cyst |
| Hoshizaki Single, Twin and Triple, 4HC-H (listed under Everpure LLC) | Chlorine, taste and odor, nominal particulate Class I, bacteriostatic effects | None listed |
Scale reduction does not appear among the claims in these NSF listings. Pentair and 3M mark their scale claims as tested by the manufacturer. Manitowoc's sheet says Arctic Pure Plus is certified by IAPMO R&T to NSF/ANSI 42 and 53 rather than by NSF. This guide did not verify that listing with IAPMO, so check it there if it matters to you.
Does using a filter affect the ice machine warranty?
Hoshizaki's KM warranty statement and the Manitowoc manuals reviewed here do not say a filter is required or that skipping one voids coverage, but this guide did not review Manitowoc's full warranty statement. They do put maintenance problems on the owner:
- Hoshizaki: The KM series warranty excludes damage from external water supply failure or plumbing problems and from failure to clean or maintain the machine as the manual directs. Hoshizaki's FAQ says parts that fail from scale buildup are not warranty issues.
- Manitowoc: The Indigo technician's handbook says routine maintenance is not covered, and it directs owners who need frequent cleaning to have their water tested.
Filter systems have their own terms. Everpure's spec sheet lists five years on the system and one year on cartridges. Manitowoc lists three years on the head and hardware, excluding cartridges. Hoshizaki lists one year on the system, and its pages differ on whether cartridges are included, so confirm before relying on it.
Will a replacement cartridge fit any filter head?
Assume it won't. A system or ice machine water filter kit is a head or manifold plus one or more cartridges, and cartridges are specific to the product line. Part numbers also change over time. Manitowoc's documents show this well:
- A 2022 manual pairs the AR-10000 with K00338, rated at 14,000 gallons and 1.0 micron.
- A 2020 sheet pairs the AR-10000-P with K00493, rated at 15,000 gallons and 0.5 micron.
- A current Manitowoc page lists K00540 as replacing K00338, at 10,000 gallons and 5.0 micron.
Connections vary too. Manitowoc's systems use 3/8 inch John Guest push-fit ports. 3M's ICE120-S and ICE140-S use 3/8 inch FNPT. Hoshizaki's single is 3/8 inch FNPT, and its twin and triple are 3/4 inch. Everpure's Twin-i2000² is 3/4 inch in and out, while its Single PF-i2000² sheet lists 3/4 inch in and 3/8 inch out. Everpure also says to use a 3/4 inch water line and never a saddle valve.
Watch for near-identical model names. Everpure's Twin-i2000² (EV9324-02) and Twin PF-i2000² (EV9324-22) share flow and capacity ratings, but the PF version adds an EC210 prefilter with its own cartridge, EV9534-26.
What should you check when buying a used or surplus filter system?
Food Service Surplus connects buyers and sellers. The platform does not inspect, test, ship or guarantee filter systems, so get these answers from the seller:
- Full model and part number, with a photo of the head label and cartridge label.
- Whether a cartridge is included. Everpure's reference guide lists some QC7I systems with head and cartridge sold separately.
- Whether any included cartridge is factory sealed, with its date code. This guide did not find a published shelf life, so ask the manufacturer before relying on old stock.
- A used cartridge has unknown gallons on it. Treat it as spent and budget for a new one.
- Which cartridge the head accepts, how many positions it has, and whether that cartridge is still sold.
- Inlet and outlet size, and any pressure gauge or flush valve on the manifold.
- Signs of freezing or impact. Manitowoc warns that freezing can crack the housing and says not to use a cartridge with a cracked case after a fall of more than three feet.
- Any remaining warranty. Hoshizaki's KM machine warranty is limited to the original owner and is not assignable, so ask the manufacturer about transfer before pricing it in.
To compare lots, divide the delivered price by the rated gallons you will actually get from the sealed cartridges. The unit price calculator helps with that. If you are also shopping for the machine, see used commercial refrigeration listings and read buying used restaurant equipment.
Seller checklist for listing ice machine water filters
Include:
- Brand, full model and part number, plus photos of the labels.
- Number of cartridge positions and whether a prefilter is part of the system.
- Replacement cartridge number, and how many cartridges are included.
- Sealed or used status, with the date code for each sealed cartridge.
- Published flow, capacity and micron rating for that exact model.
- Connection sizes, and whether the gauge, flush valve and mounting bracket are present.
- Removal date and whether the unit was stored away from freezing temperatures.
- Quantity, whether the lot splits, and pickup or freight terms.
Sellers can list through sell used restaurant equipment, and buyers can browse restaurant equipment listings.
Sources
- Pentair Everpure: Insurice i2000 systems, Insurice i4000 systems and i2000 and i4000 replacement cartridges
- Pentair Everpure spec sheets: Single PF-i2000² EV9324-21 (PDF), Twin-i2000² EV9324-02 (PDF), Twin PF-i2000² EV9324-22 (PDF) and Quad-i4000² EV9325-04 (PDF)
- Pentair Everpure: Foodservice reference guide (PDF)
- Pentair: Hard water solutions and Ion exchange water softeners
- 3M: ICE120-S and ICE125-S spec sheet (PDF) and ICE140-S and ICE145-S spec sheet (PDF)
- Solventum: 3M High Flow Series ICE120-S and ICE140-S
- Manitowoc: Arctic Pure Plus spec sheet (PDF), Arctic Pure Plus replacement instructions (PDF), ArcticPure system manual (PDF), Arctic Pure filter cartridge page and Indigo series technician's handbook, part 000014794 (PDF)
- Hoshizaki: H9320 water filters spec sheet (PDF), product pages H9320-51, H9320-52 and H9320-53, and KM-520MAJ
- Hoshizaki: Warranty page, KM series warranty statement (PDF) and Training and FAQs
- NSF: NSF/ANSI 42, 53 and 401 overview (PDF)
- NSF certified product listings: Insurice PF Single, Insurice Twin, Insurice Quad, HF20, HF40 and Hoshizaki 4HC-H
- USGS: Hardness of water
Related guides
- Bar Equipment List: Underbar, Refrigeration and Glassware Checklist
A bar equipment list with maker specs for ice bins, bar sinks, glass washers, back bar coolers and draft, plus FDA Food Code items and used-buying checks.
- Coffee Shop Equipment List: What You Need, New or Used
A coffee shop equipment list with maker specs for espresso machines, grinders and brewers, utilities to plan first and what to check on used pieces.
- Commercial Refrigerator Sizes: Reach-In, Undercounter, Prep and Back Bar
Commercial refrigerator sizes from manufacturer spec sheets: reach-in, undercounter, chef base, prep and back bar dimensions, plus clearances and plugs.