How Many Ounces in a Shot Glass? Shot Sizes for Bars and Restaurants

A US shot is commonly 1.5 fl oz, but we found no federal definition of one. See shot, pony and jigger sizes, pour cost math and surplus glassware checks.

By Food Service SurplusPublished 11 min read
Buyer guideEquipment

A standard US shot is commonly 1.5 fluid ounces, which is about 44 ml or 3 tablespoons, but the glass itself may hold more or less than that. Libbey's foodservice line alone lists whiskey shot glasses from 1 to 2 ounces.

We found no federal definition of a "shot" in the TTB documents cited here. NIAAA does use the number in its standard drink definition: about 14 grams of pure alcohol, or 0.6 fluid ounces, with 1.5 fluid ounces of 40% spirits as its example. For a bar, the number that counts is the written house pour and the tool that measures it.

Shot size chart: ounces, ml and tablespoons

These figures are calculated at 1 fl oz = 29.5735 ml, 2 tablespoons = 1 fl oz and 3 teaspoons = 1 tablespoon. NIST lists the same conversion, rounded to 29.57 ml.

Fluid ounces Milliliters Tablespoons Teaspoons Where you'll see it
0.5 14.8 1 3 Small side of some jiggers
0.75 22.2 1.5 4.5 Small side of a 1.5 oz jigger
1 29.6 2 6 Pony
1.25 37.0 2.5 7.5 Low end of the common shot range
1.5 44.4 3 9 Common US shot
1.69 50.0 3.38 10.14 50 ml bottle (TTB rounds to 1.7 fl oz)
2 59.1 4 12 Neat or rocks pour at some bars, or a short double
3 88.7 6 18 Double at 2 x 1.5 oz

Does federal law define a shot?

Not in anything we could find. TTB's net contents guidance lists authorized bottle sizes, from 50 ml to 3.75 L, and doesn't mention a shot, jigger or serving. WebstaurantStore's glossary also says there is no federal standard and that bars set their own. That's what these documents show, not a legal opinion.

The closest federal regulatory number is about labels. TTB Ruling 2013-2, an interim 2013 policy, uses 1.5 fl oz (44 ml) as the serving size in voluntary Serving Facts statements for distilled spirits above 24% alcohol by volume, or 50 ml for a 50 ml bottle. TTB says a serving size in those statements isn't a recommended amount. We read that as a labeling rule, not a rule for how bars pour.

Do state or local laws limit pour size?

They can. Utah Code 32B-5-304, in the version effective March 13, 2026, limits a retail licensee to 1.5 ounces of primary spirituous liquor per beverage, dispensed through a calibrated metered system approved by the state. It also says a patron may have no more than 2.5 ounces of spirituous liquor at a time, with one listed exception.

As we read it, a jigger or lined glass wouldn't replace that metered system for a primary spirit in Utah. We didn't survey other states, so check with your state alcohol agency and local licensing office before setting a house pour.

Pony, jigger, double and rocks: where do sources disagree?

Term One source Another source
Shot WebstaurantStore: most glasses hold 1.25 to 1.5 oz, and 1.5 oz is most common NIAAA: uses a 1.5 fl oz shot as its example. Wikipedia: 1.25 to 1.5 US fl oz outside Utah
Pony WebstaurantStore glossary: a 1 oz pour, or the small glass for it WebstaurantStore jigger guide: the small side, 0.5 to 1 oz. American Heritage: a small glass for beer or liqueur, no ounces given
Jigger American Heritage: a liquor measure usually holding 1.5 oz WebstaurantStore: most common pairs are 1.5 x 0.75 oz and 2 x 1 oz. Wikipedia: about 2 oz before Prohibition
Double WebstaurantStore shot guide: usually 3 to 4 oz, charted at 3 oz Wikipedia: may be 2 oz or more, with a US range of 1.5 to 3 oz
Rocks WebstaurantStore measuring guide: a 4-count, or 2 fl oz, for liquor neat or on the rocks with no mixer WebstaurantStore glossary: "on the rocks" means over ice, with no ounce figure, and a rocks glass holds about 6 to 10 oz

None of these words carries one fixed size, and "rocks" can name a service style or a glass. Our suggestion: write every pour in ounces on the spec sheet, since a 2-ounce double and a 3-ounce double cost different amounts.

What jigger sizes do bar-tool makers list?

Maker and item Large side Small side Notes
Winco J-1 1 oz 1/2 oz Size option on J-4 page
Winco J-2 1-1/4 oz 3/4 oz Size option on J-4 page
Winco J-3 1-1/2 oz 3/4 oz Size option on J-4 page
Winco J-4 1-1/2 oz 1 oz 2.25 in. high, 2.38 in. diameter
Winco J-5 2 oz 1 oz Size option on J-4 page
OXO 3105000 1.5 oz 1 oz Inside marks: 0.33, 0.75, 1.5 oz and 0.25, 0.5, 1 oz (WebstaurantStore listing)

Spec fields can mislead. Winco's J-4 page is titled 1 x 1-1/2 oz, while its capacity field shows 1.0 oz, so read the title and the tool itself. Our inference: a bar pouring 1.5 ounces with 0.75-ounce modifiers fits a J-3, and one pouring 1 and 1.5 ounces fits a J-4. For the rest of the setup, see our bar equipment list.

Shot glass capacity vs. pour line

A shot glass's listed size isn't its pour. Libbey's lined glasses show why:

Maker and item Listed capacity Fill or cap line Height (in) Case pack
Libbey 5031 1 oz Not listed 2.88 72
Libbey 5120 1.5 oz Not listed 2.38 72
Libbey 48/1532G 2 oz Not listed 2.38 72
Libbey 5135/S0617 1.25 oz 1/2 oz 2.88 48
Libbey 5127/S0711 1.5 oz 7/8 oz 2.88 48
Libbey 5126/S0711 2 oz 7/8 oz 2.88 48
Libbey 5126/A0007 2 oz 1 oz 2.88 48
Anchor Hocking 5281/931U (WebstaurantStore listing) 1.5 oz 0.75 oz 2 7/8 12
Libbey 5120/A0007 (WebstaurantStore listing) 1.5 oz 1 oz 2 1/4 12

Libbey's pages don't say whether capacity is measured to the brim. WebstaurantStore's FAQ on the Anchor Hocking listing says its glassware capacities are approximate maximums and shouldn't be used as a serving measure. So a "1.5 oz" glass may not be a practical 1.5-ounce pour. On a lined glass, the line is the number to compare.

Libbey also lists the same height and diameter for glasses with different capacities: 5120 and 48/1532G are both 2.38 x 2.0 inches, at 1.5 and 2 ounces. Dimensions alone won't identify a glass. Before adopting one, check it with water and a measure you trust.

What does a shot cost to pour?

Divide bottle ounces by pour size to get pours, then divide bottle cost by pours. A 750 ml bottle is 25.36 fl oz, so a 1.5 oz pour gives about 16.9 pours. The $24 bottle and $9 menu price below are invented for the arithmetic:

Pour Pours per 750 ml Cost per pour Pour cost at $9
1 oz 25.4 $0.95 10.5%
1.25 oz 20.3 $1.18 13.1%
1.5 oz 16.9 $1.42 15.8%
1.75 oz 14.5 $1.66 18.4%
2 oz 12.7 $1.89 21.0%

In this example, a quarter-ounce over-pour adds $0.24 per drink and cuts the bottle from 16.9 pours to 14.5. These numbers assume no spills or waste. WebstaurantStore's rougher estimate is about 16 shots per bottle, without naming a bottle size. Other sizes follow the same math: a 1 L bottle is 33.81 fl oz (22.5 pours at 1.5 oz), and a 1.75 L bottle is 59.17 fl oz (39.4 pours).

Run your own bottle prices through the food cost calculator, then test menu prices with the menu price calculator. For draft pricing, start with keg sizes.

What should you check before buying surplus shot glasses?

Food Service Surplus connects buyers and sellers. The platform does not inspect, test or guarantee glassware, so get these answers from the seller:

  • Chips and cracks. Libbey's care instructions say to remove abraded, cracked or chipped glassware from use. Ask for close photos of rims and bases, and for how the glasses were packed and stored. Check a sample from each case at pickup, and leave damaged glasses out of the usable count.
  • Count per case. Don't assume one number. Libbey lists 72 for item 5120 and 48 for its lined fluted glasses, while the WebstaurantStore listings above sell lined glasses by 12. Ask for total glasses, and whether cases are sealed or partial.
  • Case weight. Libbey lists a case of 5120 at 18.45 lb. A scale is a rough check on a sealed case, in our view, not proof of count or condition.
  • Matching a set. Get the maker, item number, capacity and line position, then compare a sample with your current glass. The 7/8 oz and 1 oz line versions of Libbey's 2-ounce glass differ by 1/8 ounce per pour. On our invented bottle, that's about $0.12 a drink.
  • Decoration. Ask whether glasses carry a logo, color or imprint.
  • Jiggers in the same lot. Check that size stamps are readable, and test any dented jigger.

Buyers can browse restaurant smallwares and restaurant equipment.

Seller checklist for listing shot glasses

  • Maker, item number and a photo of the case label.
  • Listed capacity, and the pour line position if there is one.
  • Height and top diameter, measured if the label is missing.
  • Plain, fluted, colored or imprinted, with a photo of any logo.
  • Cases, count per case and total glasses.
  • Sealed or partial cases, plus storage conditions.
  • Close photos of rims and bases, and notes on any chipped or cracked pieces.
  • Whether the lot splits, plus pickup location.

Sellers can list extra stock through sell surplus restaurant supplies.

Frequently asked questions

How many ml are in a shot?

A 1.5 fl oz shot is 44.4 ml by exact conversion, which TTB and others round to 44 ml. A 1 oz pour is 29.6 ml.

How many tablespoons are in a shot?

A 1.5 fl oz shot is 3 tablespoons, or 9 teaspoons. A 1 oz pour is 2 tablespoons.

Is a jigger the same as a shot?

Not always. A jigger is a measuring tool, and sizes range from 1/2 oz to 2 oz on the Winco items above. American Heritage describes the measure as usually holding 1.5 oz, the same as a common US shot.

How many shots are in a 750 ml bottle?

About 16.9 at 1.5 fl oz, before spills or waste. The same bottle gives about 25.4 pours at 1 oz and 12.7 at 2 oz.

How many ounces is a double?

It depends on the bar. WebstaurantStore charts a double at 3 oz, while Wikipedia says a US double may be 2 oz or more, so put the number on your spec sheet.

What size shot glass should a bar buy?

Start from your written house pour and any local limit. Our view is that a lined glass with capacity above the pour is easier to read than a glass whose listed size equals the pour.

Sources