Aluminum Foil Pan Sizes Chart: Full, Half and Third Steam Table Pans
Foil pan sizes with manufacturer dimensions, depths and capacities for steam table and carryout pans, plus lids, gauge and surplus buying checks.
In D&W Fine Pack's published specs, a full-size foil steam table pan is about 20.75 x 12.81 inches at the rim and holds 174.8 to 342 fluid ounces, depending on depth. A half pan is about 12.75 x 10.38 inches and holds 79.5 to 120 fluid ounces. A third pan is 12.63 x 6.50 inches and holds 93 fluid ounces.
Dimensions vary by manufacturer, and the same pan can be listed with different numbers depending on what gets measured. When you buy foil pans in case lots, the manufacturer and item number are the source of truth, not the words "half pan" or "deep."
Foil steam table pan size chart
This chart takes outside dimensions, depth and capacity from D&W Fine Pack's current product pages where one is cited below. Those pages list a single unlabeled length, width and height, so the inside dimensions, the outside and inside labels, and item 16119 come from D&W's 2018 brochure. Quart figures are calculated at 32 fluid ounces per quart.
| Size and depth | D&W item | Outside top (in) | Inside top (in) | Depth (in) | Capacity, fl oz (qt) | Case pack |
|---|---|---|---|---|---|---|
| Full, shallow | 16113 | 20.75 x 12.81 | 19.56 x 11.63 | 1.50 | 174.8 (5.5) | 50 |
| Full, medium | 16117 | 20.75 x 12.81 | 19.56 x 11.63 | 2.19 | 228 (7.1) | 50 |
| Full, medium deep | 16119 | 20.75 x 12.81 | 19.56 x 11.63 | 2.94 | 320 (10) | 50 |
| Full, deep | 16004 | 20.7 x 12.8 | 19.56 x 11.63 | 3.3 | 342 (10.7) | 50 |
| Half, shallow | 16240 | 12.75 x 10.38 | 11.75 x 9.38 | 1.69 | 79.5 (2.5) | 100 |
| Half, medium | 16121 | 12.75 x 10.38 | 11.75 x 9.38 | 2.19 | 104 (3.25) | 100 |
| Half, deep | 16223 | 12.75 x 10.38 | 11.75 x 9.38 | 2.56 | 120 (3.75) | 100 |
| Third | 16150 | 12.63 x 6.50 | 11.75 x 5.63 | 3.94 | 93 (2.9) | 100 |
D&W's own documents don't always agree. The current page for 16004 lists 20.7 x 12.8 x 3.3 inches, while the 2018 brochure lists 20.88 x 12.94 x 3.38. Item 16240 is 12.75 x 10.38 x 1.69 inches on its product page and 12.72 x 10.34 x 1.50 in the brochure. The sheets don't say whether capacity means brimful or a working fill, so don't plan portions right up to the number.
How do other manufacturers list the same sizes?
Novolex's 2026 steam table sheet lists these pans under the Pactiv Evergreen brand, with one set of dimensions per item.
| Size and depth | Item | Listed dimensions (in) | Case pack |
|---|---|---|---|
| Full, shallow, heavy-duty | Y6110XH | 19.6 x 11.6 x 1.7 | 40 |
| Full, medium, heavy-duty | Y6120XH | 19.6 x 11.6 x 2.2 | 40 |
| Full, deep, heavy-duty | Y6050XH | 19.6 x 11.6 x 3.1 | 40 |
| Full, deep, extra heavy-duty | Y6050XXH | 19.6 x 11.6 x 3.1 | 40 |
| Half, shallow | Y6012XH | 11.8 x 9.4 x 1.7 | 100 |
| Half, medium | Y6112H | 11.8 x 9.4 x 2.2 | 100 |
| Half, deep | Y6132H | 11.8 x 9.4 x 2.6 | 100 |
| Half, extra deep | 634260Y | 11.8 x 9.4 x 4.2 | 100 |
| Third, deep | Y6062XH | 11.8 x 5.6 x 3.3 | 200 |
The sheet doesn't say where those numbers are measured, but they sit close to D&W's inside top dimensions, not its outside ones. That creates an easy mistake when comparing listings: a 19.6 x 11.6 pan and a 20.75 x 12.81 pan may be close to the same size. Compare like with like, or ask for a measured rim.
Depth names don't travel either. A "deep" full pan is 3.3 inches at D&W and 3.1 on the Novolex sheet, and Novolex's light-weight "deep" half pan (Y6132L) is 2.2 inches against 2.6 for its standard deep half. Product pages can also differ from sheets: the Y6050XH page shows 3.4 inches and 346 ounces. Some capacities do match D&W's: Y6132XH is listed at 120 ounces and Y6062XH at 93 ounces.
What about quarter-size pans and "quarter tray" ounces?
Quarter-size foil steam pans exist, but the D&W and Novolex charts above don't include one. Handi-foil says its steam table line includes one-quarter pans along with full, half, two-thirds and one-third sizes, and it lists matching lids. The Handi-foil web pages cited here don't publish dimensions or capacities, so ask the seller for the item number and a measured rim.
"Quarter" can also mean a quarter sheet, which is a different pan. D&W's 1/4 sheet (19257) is 12.81 x 8.81 x 1.25 inches and holds 56.3 fluid ounces. That is a shallow bakery pan, so check which one a listing means.
Do foil pans fit a 12 x 20 steam table well?
Vollrath's pan layout reference is built around a 12 x 20 inch opening, and our hotel pan size guide covers how stainless and plastic pans fill it. Full-size foil rims are close to stainless ones: D&W's foil full pan is 20.75 x 12.81 inches, and Vollrath's stainless 30022 is 20.844 x 12.781.
They still aren't identical. D&W's foil third pan is 6.50 inches wide, and Vollrath's stainless third (30322) is 6.844 inches, so three foil thirds span about 19.5 inches and three stainless thirds about 20.5. The foil spec sheets cited here make no claim about well fit or adapter bars. Test one pan in your own well, with food in it, before buying a lot for that use.
What sizes do round and oblong carryout pans come in?
Manufacturers pair these pans with foil board lids or clear dome lids. The "lb" name isn't a volume measurement: D&W's 2 lb pan holds 33.2 fluid ounces and its 5 lb pan holds 76.
| Pan | Item | Outside (in) | Depth (in) | Capacity (fl oz) | Case pack | Listed lids |
|---|---|---|---|---|---|---|
| D&W 7" round | 14710 | 7.12 | 1.50 | 26 | 500 | K18 board, H22B dome |
| D&W 8" round | 14871 | 8.31 | 1.56 | 37 | 500 | K19 board, H23 dome |
| D&W 8" square | 15054 | 7.88 x 7.88 | 1.34 | 33 | 500 | See product page |
| D&W 2 lb oblong | 15651 | 8.50 x 6.38 | 1.47 | 33.2 | 500 | K17 board, H21 dome |
| D&W 2.25 lb oblong with board lid | 15809 | 8.44 x 5.94 | 1.81 | 32.7 | 200 | K15 board |
| D&W 5 lb oblong | 15750 | 9.63 x 7.06 | 2.72 | 76 | 250 | K23 board |
| Pactiv Evergreen 7" round | Y52725 | 6.6 (as listed) | 1.5 | 24 | 250 | L527, YP527 |
| Pactiv Evergreen 8" round | Y55830 | 7.8 (as listed) | 1.6 | 37 | 250 | YP558 |
| Pactiv Evergreen oblong | Y78830 | 8 x 5.4 (as listed) | 1.9 | 36 | 400 | YL788, YP7680000000 |
Note that D&W's 2.25 lb pan holds slightly less than its 2 lb pan, because the two have different footprints and depths. Compare fluid ounces and dimensions, not the pound label. Novolex also sells flat-lid combos such as Y527TP and Y558TPZ, so check whether a case holds bases only or sets.
What does heavy duty mean on a foil pan?
None of the manufacturer documents cited here define an industry standard, so treat "heavy duty" as each maker's own label. D&W comes closest to explaining the term for foil. Its item legend says the lightest gauge of an item carries no mark, H means heavy, XH extra heavy and XXH extra, extra heavy. Its example: 622, 622H and 622XH are 35, 40 and 45 gauge, and it notes that gauges differ by container.
So in D&W's example, the higher gauge number is the heavier pan, though D&W notes that gauges differ by container. Stainless pans run the other way: Vollrath's Heavy-Duty Super Pan is 20 gauge against 22 gauge for Super Pan V. Don't carry the stainless rule over to foil, and don't compare gauge numbers across brands without a spec sheet.
Weight is a practical cross-check. D&W lists three half pans with the same 120-ounce capacity and case pack of 100: Mainstream 16223 at 9.1, Heavy 16220 at 9.67 and Extra Heavy 16221 at 12.08. The product pages don't state the unit. The 2018 brochure gives case weight in pounds, with some different figures, so use weight as a rough comparison. Novolex's sheet labels heavy-duty and extra heavy-duty items but doesn't publish gauge.
Which lids fit foil steam table pans?
Treat lids as brand-specific. Both makers list their own matches, and their published lid numbers aren't comparable, because Novolex's run smaller than D&W's in the same way its pan numbers do.
| Pan size | D&W flat foil lid | Size (in), case pack | Novolex flat cover | Size (in), case pack |
|---|---|---|---|---|
| Full | 16001 | 20.81 x 12.88 x 0.63, 50 | Y112045 | 20.3 x 12.4 x 0.6, 80 |
| Half | 16200 | 12.81 x 10.88 x 0.63, 100 | Y101230 | 12.3 x 9.9 x 0.6, 100 |
| Third | 16144 | 12.69 x 6.56 x 0.50, 100 | Y116225 | 12.3 x 6.2 x 0.5, 200 |
D&W's product page and catalog list lid 16200 at the size above, while its 2018 brochure shows 13.06 x 10.19 x 0.65 inches, so test a lid on the pan. D&W also lists a polystyrene dome for half pans (37062210, 13.25 x 10.75 x 1.25 inches). Handi-foil says its lids are designed to fit its Tru-Fit pans. Watch case counts: Novolex's full-size cover ships 80 to a case and its full pans ship 40, so one lid case doesn't equal one pan case.
Can foil pans go in the oven and freezer?
Yes, per the manufacturers, within their limits. Pactiv Evergreen's product page for Y6050XH says it can be stored in the freezer or baked in the oven and lists a range of -20°F to 400°F. Flat aluminum covers carry the same range on Pactiv Evergreen's Y112045 page, but board lids and plastic domes are rated lower, as D&W's chart shows:
| Material (D&W chart) | Low | High |
|---|---|---|
| Aluminum | -20°F | 400°F |
| Foil board lids | -20°F | 350°F |
| OPS clear domes | 20°F | 180°F |
| PETE domes | -20°F | 120°F |
D&W calls these typical values, not limiting specifications, and Novolex says its guidelines don't replace testing under your own conditions. A dome rated to 180°F doesn't belong in a 400°F oven. For microwaves, Novolex's two-piece container sheet says "Not suggested for microwave use." See are takeout containers microwave safe for other materials.
On acidic foods, USDA FSIS says pinholes in foil or a blue liquid can form when salt, vinegar, highly acidic or highly spicy foods touch aluminum foil, and that the result is a harmless aluminum salt with no safety problem. That page addresses foil and was last updated in 2015. Novolex lists a half pan with a protective coating inside (Y6132XHE), though its sheet doesn't state the coating's purpose, so ask if you hold acidic food for long periods.
How do you compare surplus case lots?
Case price alone misleads, since a full pan case can be 40 or 50 and a third pan case 100 or 200. Convert to usable pan-and-lid sets. These prices are invented for the arithmetic:
| Offer | Pans | Fitting lids | Delivered price | Usable sets | Cost per set |
|---|---|---|---|---|---|
| A | 50 | 50 | $85 | 50 | $1.70 |
| B | 80 | 40 | $110 | 40 | $2.75 |
| C | 100 | 0 | $90 | 0 until lids are sourced | Not comparable yet |
If depth differs, compare by volume too. A shallow full pan at $1.20 and 174.8 fluid ounces costs about $0.69 per 100 ounces. A deep full pan at $1.50 and 342 fluid ounces costs about $0.44. Run your own numbers in the unit price calculator.
What should you verify before buying surplus foil pans?
Food Service Surplus connects buyers and sellers. The platform does not inspect, test or guarantee pans, so get these answers from the seller:
- Manufacturer and item number from the case label. Older D&W letter codes such as B98 map to current numbers such as 16117 in its brochure.
- Exact case count, and whether cases are sealed or partial.
- Lid item number, lid count and whether lids are in the same lot.
- Weight class (light, heavy or extra heavy) and gauge if the label shows it.
- Dents, torn rims or crushed nesting stacks. Ask for photos of the stack and of a single pan.
- Measured rim and depth for any case without a readable label.
- Storage conditions and pickup or freight terms.
Stacks are hard to judge from a photo, so ask whether pans separate cleanly. If lid fit matters, test one set before relying on the whole lot. Deli container sizes applies the same checks to smaller packaging.
Seller checklist for listing foil pans
- Pan type and size: full, half, third, quarter, round or oblong.
- Manufacturer, item number and photo of the case label.
- Listed dimensions and depth, plus capacity if the label gives it.
- Cases, count per case and total units.
- Weight class, such as heavy or extra heavy.
- Lids: item number, type (foil, board or dome) and count.
- Condition notes for damaged cases, crushed stacks or partial cases.
- Whether the lot splits, plus pickup location.
Buyers can browse food packaging and disposables, and sellers can list extra cases through sell surplus restaurant supplies.
Sources
- D&W Fine Pack: Aluminum product line brochure, 2018 (PDF) and aluminum containers catalog section (PDF)
- D&W Fine Pack steam table pages: 16113, 16117, 16004, 16240, 16121, 16223, 16220, 16221, 16150
- D&W Fine Pack lid pages: 16001, 16200, 37062210, K18
- D&W Fine Pack carryout pages: 14710, 15054, 15651, 15809
- Novolex: Steam table pans and covers sheet (PDF) and two-piece containers sheet (PDF)
- Pactiv Evergreen product pages: Y6050XH, Y6132XH, Y6062XH, Y112045
- Handi-foil: Steam table pans, products overview and steam table pan lids
- Vollrath: Pan layout reference (PDF), Super Pan V line, items 30022 and 30322, and Heavy-Duty Super Pan line
- USDA FSIS: Meat and Poultry Packaging Materials
Related guides
- Foam Container Bans by State: Where Polystyrene Takeout Is Restricted
State-by-state foam container bans from statutes and agencies: who is covered, sale rules, dates and exemptions. Last reviewed November 9, 2026.
- Paper Bag Sizes Chart: Kraft Bag Numbers, Dimensions and Capacity
Paper bag size chart with maker dimensions and basis weights for #2 to #25 kraft SOS bags, plus sacks, handle bags and surplus buying checks.
- Coffee and Paper Cup Sizes Chart: Ounces, Dimensions and Lid Fit
Coffee and paper cup sizes with maker specs: ounces, top diameter, height, case pack and lid fit, plus cold cup rim sizes and surplus lot checks.