Pallet Calculator

Estimate cases per layer, cases per pallet, total height and weight before you buy or ship a bulk lot. Nothing to sign up for, nothing saved.

Case
Pallet and limits

Cases per pallet

50

10 per layer, up to 5 layers. Limited by height.

Units per pallet
25,000
Total height
56 in
Total weight
940 lb
Pallet deck covered
100%

This is a planning estimate. It keeps cases upright with no overhang and doesn’t check case strength, so confirm the pattern and limits with your carrier or warehouse.

Comparing a pallet with a smaller lot? Use the unit price calculator and the inventory carrying cost calculator.

How the cases-per-pallet math works

  1. Measure the case length, width and height, and keep the height fixed so cases stay upright.
  2. Find the most cases that fit in one layer on the pallet deck without overhang.
  3. Subtract the pallet height from your height limit, divide by the case height, and round down for layers.
  4. Multiply cases per layer by layers.
  5. If you set a weight limit, stop when the cases and pallet reach it.

In the default example, a 16 x 12 x 10 inch case on a 48 x 40 inch pallet fits 10 cases per layer by turning part of the layer, compared with 9 when every case faces the same way. With a 60 inch limit and a 6 inch pallet, that makes 5 layers and 50 cases. These defaults are example numbers, not shipping limits.

Why this matters when buying surplus by the pallet

  • Storage: a pallet takes floor space until you use it up. Check that you have the room and a way to move it.
  • True quantity: ask the seller for the case count, not just “one pallet.” Pallets can be partial or mixed, and any damaged cases change your unit cost.
  • Freight: height and weight affect how a pallet can ship, so get a quote using the real figures, or plan pickup with the right equipment.
  • Cost per unit: run the numbers through the unit price calculator. For big buys, the inventory carrying cost calculator shows what holding the stock costs.

Pallet size figures come from an investigation of new and recovered wood shipping platforms in the United States, published in BioResources.

Where bulk lots come from

Distributors, manufacturers and operators sometimes end up with overstock they need to move in quantity. Food Service Surplus connects buyers with independent sellers of food packaging and disposables, cleaning supplies and food and beverage inventory. Confirm counts, condition and pickup with the seller. If you have extra pallets to move, you can list surplus restaurant supplies.

Frequently asked questions

How do you calculate how many cases fit on a pallet?

Work out how many cases fit in one layer on the pallet deck, then how many layers fit under your height limit. Subtract the pallet height from the limit and divide by the case height, rounding down. Cases per pallet is cases per layer times layers, unless a weight limit stops the stack sooner.

What size is a standard pallet in the US?

The 48 x 40 inch pallet is the dominant standardized size. A Virginia Tech survey found it made up about 35% of new wood pallets and 69% of recycled or remanufactured pallets in 2016. Other sizes are in use, so measure or ask if a lot is on a different pallet.

How tall can a pallet be stacked?

There is no single limit. It depends on your carrier, trailer, warehouse racking and how much weight the bottom cases can carry. Get the limit from whoever is moving or storing the pallet, then enter it as the max total height.

Why does this calculator rotate some of the cases?

Turning part of a layer sometimes fits more cases than laying them all the same way. The calculator tries both rotations and a two-block mix, then uses the highest count. Real pallet patterns also have to be stable, so confirm the pattern with your warehouse.

Does it account for case strength or overhang?

No. Cases stay upright with no overhang, and the math does not check whether the bottom layer can carry the load. Look for stacking limits printed on the case and follow them.